
PENN Rival II MultiplierLevel Wind
The PENN Rival II Level Wind is a conventional boat fishing multiplier reel, available in 15LW, 20LW and 30LW sizes with dedicated left and right-hand versions.
15LW£74.99Out of stock
15LW£74.99£79.99
20LW£79.99£89.99
20LW£79.99£89.99
30LW£89.99£99.99
30LW£89.99£99.99Specification Comparison
| Spec | Size 15LW | Size 20LW | Size 30LW |
|---|---|---|---|
| Gear Ratio | 5.1:1 | 5.1:1 | 3.9:1 |
| Braid Capacity | 580yd/20lb, 435yd/30lb, 305yd/50lb | 865yd/20lb, 650yd/30lb, 455yd/50lb | 1,020yd/30lb, 710yd/50lb, 590yd/65lb |
| Weight | Approx. 460g | Approx. 485g | Approx. 540g |
Overview
The PENN Rival II Level Wind is a conventional multiplier reel built for boat fishing, combining an automatic level-wind mechanism with PENN's HT-100 carbon-fibre drag washers and a corrosion-resistant graphite frame. It's offered across three sizes, 15LW, 20LW and 30LW, each with its own gear ratio and line capacity, so anglers can match the reel to the depth, line strength and species they're targeting.
Every size is available as a dedicated right-hand or left-hand model rather than a reel with an interchangeable handle, so the winding side needs to be chosen correctly at the point of purchase. The 15LW and 20LW share a 5.1:1 gear ratio, while the 30LW uses a lower 3.9:1 ratio for more controlled retrieval under load.
Construction centres on a lightweight graphite frame and sideplates, a marine-grade bronze alloy main gear and a machine-cut brass pinion gear, backed up by two shielded stainless-steel ball bearings. The result is a straightforward, dependable conventional reel rather than a high bearing-count, feature-heavy multiplier.
Perfect For
The Rival II Level Wind is particularly well suited to general-purpose boat fishing, where the automatic level-wind system simplifies line management as tackle is repeatedly lowered and retrieved. It can be matched with suitable boat rods for natural baits, bottom rigs and appropriate artificial presentations, with potential target species including cod, pollack, ling, rays, dogfish and, with appropriately matched heavy tackle, conger eel.
The compact 15LW suits general inshore boat fishing where a more manageable reel is preferred, the 20LW offers a useful middle ground with extra line reserve for deeper water or heavier fishing, and the 30LW is aimed at heavier applications needing the largest line capacity in the range. As with any multiplier, the correct size depends on fishing depth, line strength, expected species and the amount of line required, and the reel should always be matched to a suitable rod, line and terminal tackle system.
Technical Insight
The star-drag system, built around PENN's HT-100 carbon-fibre washers, controls how much resistance is applied as a fish pulls line from the reel, helping maintain consistent pressure during a fight rather than sudden spikes that can damage line, knots or hooks. This is especially relevant when fishing with braid, where low stretch transmits pressure changes directly to the tackle, so correct drag adjustment matters.
The automatic level-wind mechanism moves the line guide from side to side as the handle turns, distributing line evenly across the spool and reducing the need to guide it manually, which is particularly useful when retrieving from depth or with heavier bottom tackle. Auto-engaging gears let the reel move from free spool to retrieve as soon as the handle turns, while the two shielded stainless-steel bearings and line capacity rings on the spool support reliable, practical operation during regular boat fishing use, though the reel should still be cleaned and maintained after saltwater sessions.
Is the PENN Rival II Level Wind suitable for beachcasting?
It's primarily a boat-fishing multiplier. Although a multiplier can be used for casting, the Rival II's level-wind mechanism adds another point of line contact, and the reel isn't marketed as a dedicated long-distance surfcasting model, so a purpose-built casting multiplier would be a better choice for maximising casting distance.
What's the difference between the 20LW and 30LW?
The 20LW has 5.1:1 gearing and capacity for 650 yards of 30lb braid, while the 30LW has lower 3.9:1 gearing and accommodates 1,020 yards of 30lb braid. The 30LW is therefore more suited to applications needing substantially greater line capacity, but the 20LW may be a better-balanced choice for general boat fishing.
Does the Rival II Level Wind measure how much line has been released?
No. The standard Rival II has line capacity rings, which give an approximate visual indication of the line remaining on the spool, but they don't measure the amount of line released. For that feature, choose a Rival II Level Wind Line Counter model instead.
Can I choose either handle orientation, or are the left and right-hand versions interchangeable?
Left-hand and right-hand Rival II Level Wind reels are distinct models with different manufacturer codes, so the handle position isn't interchangeable after purchase. Make sure you select the correct winding orientation for your size before ordering.
- •- Genuine PENN Rival II Level Wind conventional multiplier reel
- •- Available in 15LW, 20LW and 30LW sizes to suit different boat fishing needs
- •- Dedicated right-hand and left-hand versions for the correct winding side
- •- Automatic level-wind mechanism distributes line evenly across the spool
- •- Lightweight, corrosion-resistant graphite frame and sideplates
- •- Marine-grade bronze alloy main gear paired with a machine-cut brass pinion
- •- PENN HT-100 carbon-fibre star-drag washers for smooth, consistent pressure
- •- Shielded stainless-steel ball bearings built for saltwater use
- •- Auto-engaging gears for simple free-spool-to-retrieve operation
- •- Line capacity rings on the spool for an at-a-glance line reference
- •- Size-specific gearing suited to different boat fishing techniques
- •- Large braided-line capacities for deep-water and heavy-tackle fishing
- •- Distinctive black and silver finish
Technical Specifications
Core
| Brand | PENN |
| Model | Rival II Level Wind |
| Type | Conventional multiplier (boat fishing) |
| Level Wind | Automatic |
| Available Sizes | 15LW, 20LW, 30LW |
Construction
| Pinion Gear | Machine-cut brass |
| Main Gear | Marine-grade bronze alloy |
| Handle | Model-specific left-hand or right-hand |
| Sideplates | Graphite |
| Frame | Graphite |
| Bearings | 2 shielded stainless-steel |
| Colour | Black / Silver |
| Gear Engagement | Auto-engaging |
Features
| Drag Type | Star drag |
| Spool Feature | Line capacity rings |
| Line Counter | Not included on standard Level Wind versions |
Performance
| Drag Washers | HT-100 carbon fibre |
You May Also Like
Customers Also Bought
PENN Rival II Multiplier Level Wind
—

































