
PENN Wrath II 702 Boat Rod7ft - 30-50lb
PENN Wrath II Boat 702 30–50lb – an extra-heavy 7ft saltwater boat rod built for cod, halibut and heavier offshore tackle.
VAT included where applicable
Overview
The PENN Wrath II Boat 7ft 30–50lb is a saltwater boat fishing rod built for anglers who need serious backbone when fishing deeper water or heavier tackle. Measuring 2.13m (7ft) and rated extra-heavy power with an extra-fast action, it sits as the strongest model in the standard Wrath II Boat range.
The rod is built around a strong composite blank fitted with K-frame stainless steel guides carrying titanium oxide inserts, giving a smooth, durable contact surface for the line. A full EVA handle and heavy-duty reel seat provide a comfortable, secure grip in wet boat conditions, while a rubber gimbal butt allows the rod to engage with suitable boat rod holders.
Constructed in two sections with a mid-joint, the Wrath II Boat breaks down to an approximate 111cm transport length, making it easier to carry and store than many one-piece boat rods, while still delivering PENN's practical build quality at an accessible price point.
Perfect For
This 30–50lb line class model is aimed at heavier offshore boat fishing, where substantial terminal tackle, strong tidal flows or larger fish demand greater rod power than the lighter 12–20lb or 20–30lb Wrath II Boat models can offer. PENN specifically highlights it for targeting large cod and halibut in Norwegian waters, though it's equally suited to appropriately matched heavier boat-fishing applications around the British coast.
It can also be considered for wreck and rough-ground boat fishing, where controlled fish handling and resistance to heavy leads matter, as well as heavier bottom-fishing rigs and suitably weighted boat-lure presentations. It is not specifically marketed as a dedicated slow-pitch jigging rod, so anglers using demanding jigging techniques should check the rod's action and working-weight range suit their method.
Technical Insight
The extra-heavy power rating describes the blank's resistance to bending, while the extra-fast action describes how it loads – bending most readily near the tip before the stronger lower sections engage under heavier loading. This combination gives the Wrath II Boat the responsiveness to monitor rigs while retaining the strength for demanding tackle.
The 30–50lb figure is a line class rather than a casting weight; PENN's regional catalogue separately lists a 200–600g working weight range (roughly 7–21oz) as tackle-selection guidance, not a certified casting or lifting limit. The double-footed K-frame guides with titanium oxide inserts add extra frame support for demanding saltwater use, and the two-piece mid-joint construction keeps the rod practical to transport without compromising the blank's performance when properly engaged before fishing.
Is SKU 1581618 the 30–50lb model?
Yes. Both PENN's regional catalogue and UK retailers identify SKU 1581618 as the 30–50lb Wrath II Boat 702. The 20–30lb version carries a different code, 1581617.
What weight of lead can I use with the Wrath II Boat 30–50lb?
PENN's regional catalogue lists a working weight range of 200–600g (approximately 7–21oz) for this model. This is guidance for tackle selection only, not a guaranteed overhead casting or safe lifting limit, so the correct lead should still be chosen based on depth, current and method.
Can I use this rod for halibut fishing?
PENN specifically mentions Norwegian halibut fishing as a potential application for the 30–50lb model. Suitability still depends on the size of fish, the fishing method used, and correctly matched reels, lines and terminal tackle.
Can I use a multiplier reel with this rod?
PENN's regional catalogue categorises this SKU as a spinning model, though some UK retailers list it as suitable for fixed-spool and multiplier reels. It's worth checking the rod's actual guide layout and reel-seat orientation before pairing it with a particular multiplier.
- •- Extra-heavy rod power for demanding saltwater boat fishing
- •- Extra-fast action for responsive rig monitoring
- •- Strong composite blank built for durability and backbone
- •- Recommended by PENN for heavier cod and halibut fishing in Norway
- •- Suitable for appropriately matched heavier bottom rigs and boat-lure presentations
- •- K-frame stainless steel guides with double-footed support
- •- Titanium oxide guide inserts for smooth line contact
- •- Eight guides including the tip for even load distribution
- •- Ergonomic full EVA handle for comfortable wet-weather grip
- •- Heavy-duty reel seat for secure reel attachment
- •- Rubber gimbal butt for use with compatible boat rod holders
- •- Two-piece mid-joint construction for easier transport
- •- Compact transport length for storage aboard boats
- •- Genuine PENN Wrath II Boat fishing rod, manufacturer code 1581618
Technical Specifications
Core
| Brand | PENN |
| Model | Wrath II Boat 702 |
| Length | 7ft / 2.13m |
| Line Class | 30–50lb |
| Sections | 2 |
| Product Type | Saltwater boat fishing rod |
| Rod Power | Extra Heavy (XH) |
| Joint | Mid-joint |
Action
| Action | Extra Fast, regional catalogue |
Construction
| Blank | Strong composite |
| Reel Seat | Heavy-duty design |
| Handle | Full EVA |
| Guide Frames | Stainless steel K-frame |
| Guide Inserts | Titanium oxide |
| Guide Arrangement | 7+1 |
| Total Guides | 8 including tip |
| Rear Grip Length | 39cm |
| Butt Fitting | Rubber gimbal |
Features
| Rod Bag | Nylon, regional catalogue |
Dimensions
| Transport Length | 111cm |
| Rod Weight | Approximately 296–300g |
| UPC | 031324288713 |
Performance
| Working Weight | 200–600g, regional catalogue |
| Reel Configuration | Spinning, regional catalogue; some UK retailers also indicate multiplier compatibility |
| Manufacturer SKU | 1581618 |
| EAN-13 | 0031324288713 |































