
PENN Surfblaster IV LCLong cast surf reel
PENN Surfblaster IV long-cast fixed-spool surf reel, available in 7000 or 8000 sizes for beachcasting, estuary and shore sea fishing.
7000 · Black/Grey1 left£124.99£129.99
7000Black/Grey£124.99£129.99
8000 · Black/Grey£134.99£139.99
8000Black/Grey£134.99£139.99
7000 · Silver£124.99£129.99
7000Silver£124.99£129.99
8000 · Silver£134.99£139.99
8000Silver£134.99£139.99Specification Comparison
| Spec | Reel Size 7000 | Reel Size 8000 |
|---|---|---|
| Gear Ratio | 4.8:1 | 4.3:1 |
| Mono Capacity | 530m/0.30mm400m/0.35mm305m/0.40mm | 550m/0.35mm430m/0.40mm340m/0.45mm |
| Retrieve Per Crank | 98cm | 100cm |
| Weight | 526g | 617g |
Overview
The PENN Surfblaster IV is a long-cast fixed-spool reel designed for sea fishing, available in 7000 and 8000 sizes and in Black/Grey or Silver finishes.
Built around PENN's Slow Leveline oscillation system, the reel pairs a rigid XRC carbon body and rotor with a premium metal main gear and a sealed drag, giving it the rigidity and protection needed for demanding shore conditions.
A focused 3+1 stainless steel bearing arrangement and a left- or right-hand interchangeable handle round out a reel that's been engineered specifically for the rigours of surfcasting rather than general-purpose spinning.
Perfect For
The Surfblaster IV is aimed squarely at long-distance beachcasting, where its long-cast spool and controlled Slow Leveline line lay help anglers get the most from their casting setup on open beaches, surf beaches and estuaries.
It suits anglers targeting cod, whiting, bass, rays, smoothhounds and flatfish from the shore, with the 7000 offering a lighter option for general beachcasting and the 8000's larger spool giving extra capacity for thicker mainlines or situations calling for a bigger line reserve.
In strong tidal flows, such as fishing demanding estuary marks, the rigid body, metal main gear and sealed drag give the reel a dependable platform for retrieving heavy leads and weed-laden rigs, though rod, mainline, leader and rig choice remain just as important as the reel itself.
Technical Insight
PENN's Slow Leveline oscillation lays line in closely spaced, consistent coils across the spool, which the brand says can produce around 50 wraps per oscillation, helping create an even line profile that reduces resistance as line leaves the spool during the cast.
The sealed drag system protects the drag mechanism from spray and contamination common to beach fishing, though it doesn't make the whole reel waterproof, so regular cleaning and maintenance are still recommended.
Rather than maximising bearing count, PENN has fitted a 3+1 stainless steel bearing arrangement — three ball bearings plus a roller bearing — specifically for smooth operation and instant anti-reverse in saltwater use, backing up the metal main gear's durability under sustained retrieval loads.
Which Surfblaster IV should I choose for distance casting: 7000 or 8000?
The 8000 provides substantially more line capacity and a larger spool, making it attractive for anglers using thicker monofilament or needing a greater line reserve. However, the 7000 is lighter and may balance better on some beachcasters. The 8000 won't automatically cast farther in every setup — line diameter, rod, rig and casting technique all influence distance.
Is the PENN Surfblaster IV suitable for fishing strong tides, such as an estuary mark?
Yes, it's designed for demanding shore fishing and features a rigid XRC carbon body, metal main gear and sealed drag. The 8000 may be preferable when additional line capacity is needed, but neither size eliminates the resistance created by heavy leads and strong tidal flow, so choosing an appropriate rod, mainline and rig remains essential.
Does the PENN Surfblaster IV come with a spare spool?
This hasn't been confirmed against the actual retail packaging — some listings state no spare spool is included while others give conflicting information, so it's worth checking with your retailer or PENN's packaging before assuming one is supplied.
What line should I use with the PENN Surfblaster IV?
Both sizes are rated for monofilament, with the 7000 holding 530m/0.30mm, 400m/0.35mm or 305m/0.40mm, and the 8000 holding 550m/0.35mm, 430m/0.40mm or 340m/0.45mm. Braided line capacity will depend on the true diameter and construction of the braid used, and for distance casting with heavy leads you should use an appropriate shock leader and load the spool correctly.
- •- Genuine PENN Surfblaster IV Long Cast series reel
- •- Purpose-built for shore and surfcasting
- •- Available in 7000 and 8000 sizes
- •- Black/Grey and Silver colour options
- •- Slow Leveline oscillation lays line in tight, even coils for smoother casting
- •- Rigid XRC carbon body and rotor resist flex under heavy retrieval loads
- •- Premium metal main gear for durable retrieval under shore fishing loads
- •- Sealed drag system helps protect against spray and contamination
- •- Focused 3+1 stainless steel bearing configuration for saltwater reliability
- •- Instant anti-reverse
- •- Corrosion-resistant components for saltwater use
- •- Left- or right-hand handle winding
- •- Larger 8000 spool offers extra line capacity for thicker mainlines
Technical Specifications
Core
| Brand | PENN |
| Model | Surfblaster IV |
| Type | Long-cast fixed spool |
| Max Drag | 12kg |
Performance
| Drag System | Sealed |
Construction
| Body Material | XRC carbon |
| Rotor Material | XRC carbon |
| Main Gear | Metal |
| Handle | Left/right interchangeable |
| Bearings | 3+1 stainless steel |
Features
| Corrosion Resistance | Corrosion-resistant components |
| Oscillation System | Slow Leveline |
Dimensions
| Available Sizes | 7000 / 8000 |
You May Also Like
Customers Also Bought
PENN Surfblaster IV LC Long cast surf reel
—






























