
Specification Comparison
| Spec | Size 7000 | Size 8000 |
|---|---|---|
| Mono Capacity 0.35mm | 400m | 550m |
| Mono Capacity 0.40mm | 305m | 430m |
| Weight | 101g, retailer-reported | 130g, retailer-reported |
Overview
The PENN Tidal XT Longcast Spare Spool is a genuine replacement reel spool designed for the PENN Tidal XT Longcast fixed-spool reel range, available in 7000 and 8000 sizes to match your existing reel.
Built as an original manufacturer accessory rather than a generic aftermarket part, each spool carries its own manufacturer SKU, 1609311 for the 7000 and 1609312 for the 8000, and is supplied complete with drag washers according to Veals Mail Order.
PENN publishes manufacturer-confirmed monofilament line capacities for both sizes, giving anglers a reliable reference when preparing a spool with their preferred line diameter.
Perfect For
Shore anglers who want to switch between line diameters without carrying a second complete reel will find the Tidal XT Longcast Spare Spool particularly useful, whether that means a finer monofilament for clean-ground beachcasting or a heavier diameter where abrasion resistance against rougher seabeds is needed.
Keeping a spare spool pre-loaded also means a damaged or compromised main line can be swapped out quickly during a session, rather than respooling on the beach.
The 8000 spool is reported to include two line reducers, which can help anglers fill the spool appropriately with their chosen diameter, though this should be confirmed on the packaging before relying on it.
Technical Insight
Each spool is matched to its corresponding reel size, with the 7000 holding 530m of 0.30mm, 400m of 0.35mm and 305m of 0.40mm monofilament, and the 8000 holding 550m of 0.35mm, 430m of 0.40mm and 340m of 0.45mm monofilament.
The inclusion of drag washers, confirmed by Veals, means the spool arrives ready to fit rather than as an empty shell requiring additional internal components.
Because the Tidal XT and standard Tidal ranges use separate spare-spool SKUs, these replacement spools are designed specifically for Tidal XT Longcast reels and are not intended to fit the standard Tidal Longcast or other PENN reel models.
Will a PENN Tidal XT spare spool fit the standard PENN Tidal Longcast?
No, these are separate catalogue products. The standard Tidal uses SKUs 1609309 and 1609310, whereas the Tidal XT uses 1609311 and 1609312. Veals explicitly advises that the XT spools do not fit other PENN models, so make sure you select the replacement designed for your exact reel.
Do the PENN Tidal XT replacement spools include line reducers?
Tsouros Marine reports that the 8000 replacement spool includes two line reducers. The same inclusion has not been verified for the 7000, and the accessories have not been independently confirmed by PENN's official replacement-spool specification, so it's worth checking the 8000 packaging before relying on reducers being included.
Are the Tidal XT spare spools supplied with drag washers?
Yes. Veals Mail Order confirms that the genuine Tidal XT spare spools come complete with drag washers, so you won't be fitting an empty spool shell. The precise washer material and number of washers have not been independently verified for these accessory SKUs, however.
Can I load braided line onto the PENN Tidal XT Longcast Spare Spool?
PENN publishes monofilament capacities for both the 7000 and 8000 spare spools, but does not publish separate braid capacities for these exact SKUs. If you want to run braid, treat the published mono figures as a guide rather than an exact figure, since actual braid capacity varies with the line's true diameter and construction.
- •- Genuine PENN Tidal XT Longcast replacement spool, not a generic aftermarket part
- •- Available in two sizes, 7000 and 8000, to match your existing reel
- •- Supplied complete with drag washers for quick fitting, according to Veals
- •- Manufacturer-confirmed monofilament line capacities for accurate line selection
- •- Lets anglers prepare an alternative line diameter without carrying a spare reel
- •- Useful backup if the main line becomes damaged mid-session
- •- Designed specifically for PENN Tidal XT Longcast reels, not the standard Tidal range
- •- 8000 version reported to include two line reducers
- •- Ideal for beachcasting and shore-fishing setups where line changes are common
- •- Separate manufacturer SKU and barcode for each size
Technical Specifications
Core
| Brand | PENN |
| Product Family | Tidal |
| Series | XT Longcast |
| Accessory Type | Replacement / additional reel spool |
| Intended Reel Type | Fixed-spool longcast reel |
| Available Sizes | 7000 and 8000 |
| Intended Environment | Saltwater |
Construction
| Colour | Silver / gold, retailer-reported |
| Drag Washers | Included, Veals-confirmed |
You May Also Like
Customers Also Bought
PENN Tidal XT Spare Spools
—































