
PENN Slammer IVHeavy-Duty Saltwater Fixed Spool
Heavy-duty PENN Slammer IV saltwater spinning reels, sized 2500 to 10500, built with IPX6 sealing for shore, boat and lure fishing.
2500£189.99£219.99
2500£189.99£219.99
3500£194.99£229.99
3500£194.99£229.99
4500£199.99Out of stock
4500£199.99£239.99
5500£209.99Out of stock
5500£209.99£249.99
6500£219.99Out of stock
6500£219.99£259.99
75001 left£239.99£279.99
7500£239.99£279.99
8500£259.99Out of stock
8500£259.99£299.99Specification Comparison
SwipeScrollfor more sizes
| Spec | Size 2500 | Size 3500 | Size 4500 | Size 5500 | Size 6500 | Size 7500 | Size 8500 |
|---|---|---|---|---|---|---|---|
| Gear Ratio | 6.2:1 | 6.2:1 | 6.2:1 | 5.6:1 | 5.6:1 | 4.7:1 | 5.3:1 |
| Maximum Drag | 9.0kg | 13.6kg | 13.6kg | 18.1kg | 18.1kg | 22.6kg | 22.6kg |
| Drag System | HT-100 carbon fibre | Sealed Slammer Dura-Drag | — | — | — | — | — |
| Bail Operation | Automatic trip | Automatic trip | Automatic trip | Automatic trip | Manual trip | — | — |
| Mono Capacity | 235m/0.23mm160m/0.28mm130m/0.31mm | 330m/0.23mm240m/0.28mm180m/0.31mm | 390m/0.25mm290m/0.28mm215m/0.33mm | 390m/0.28mm300m/0.33mm210m/0.36mm | 355m/0.33mm315m/0.36mm185m/0.38mm | 450m/0.36mm300m/0.38mm200m/0.46mm | 415m/0.46mm280m/0.56mm240m/0.61mm |
Overview
The PENN Slammer IV is a heavy-duty saltwater fixed-spool spinning reel engineered for anglers who demand strength, dependable gearing and serious protection against saltwater exposure.
Built with a full-metal body and sideplate, CNC-machined brass main gear and an 8+1 stainless-steel bearing system, the Slammer IV is designed to handle repeated heavy-duty use without flexing or losing gear alignment.
An IPX6-rated sealed body and spool provide substantial protection against powerful water jets and heavy spray, making the reel well suited to exposed beaches, rocky coastlines, piers and boats.
Perfect For
The smaller Slammer IV sizes — 2500, 3500 and 4500 — are particularly well suited to coastal lure fishing for bass, pollack and similar species, covering soft-plastic lures, hard-bodied plugs, surface lures and metal casting lures.
The 5500, 6500 and 7500 sizes step up to heavier shore and rock fishing applications, where substantial drag capability and line capacity are needed to handle repeated retrieval loads on rough ground.
The 7500, 8500 and 10500 models offer the greatest drag capacities in the range — up to approximately 27.2kg on the 10500 — making them relevant for boat and offshore fishing for powerful saltwater species when matched to appropriately rated tackle.
Technical Insight
The Slammer IV uses PENN's CNC Gear technology with a brass main gear, with precision machining helping maintain consistent engagement between internal components for smooth winding and reliable power transfer under load.
Its sealed Slammer drag system differs across the range: the 2500 uses HT-100 carbon-fibre drag washers, while sizes 3500 through 10500 use PENN's Dura-Drag technology, with the drag bearing-supported throughout for smoothness and control.
A hydrophobic line roller bearing adds further protection against water ingress in one of the most exposed components on a spinning reel, while bail operation switches from automatic trip on the 2500–5500 sizes to manual trip on the 6500–10500 models, giving heavier applications more deliberate control after casting.
Is the PENN Slammer IV waterproof?
The body and spool have an IPX6 rating, meaning they're designed to withstand powerful water jets, which offers substantial protection against heavy spray. However, this does not mean the reel can be submerged — IPX6 is not an immersion rating, so routine saltwater maintenance is still necessary.
What is the difference between the Slammer IV 2500 and 3500?
The 2500 has a 9.0kg maximum drag and uses HT-100 carbon-fibre drag washers. The 3500 increases the published maximum drag to approximately 13.6kg and uses the sealed Dura-Drag system, and it also includes a spare EVA handle knob, which is not listed for the 2500.
Should I buy the standard or high-speed Slammer IV?
A high-speed model retrieves more line per handle revolution, which can help with fast lure presentations and recovering slack line. However, higher gearing isn't automatically preferable when retrieving heavy lures under resistance, so the best choice depends on your fishing technique, target species and preferred retrieve speed.
Which PENN Slammer IV size is best for bass and pollack fishing?
The smaller Slammer IV sizes — 2500, 3500 and 4500 — are best suited to coastal lure fishing for bass, pollack and similar species, covering soft-plastic lures, hard-bodied plugs, surface lures and metal casting lures. Choose the size according to your rod balance, required line capacity and fishing conditions.
- •- Full-metal body and sideplate for rigid, flex-free performance under heavy loads
- •- IPX6-rated sealed body and spool for serious protection in saltwater conditions
- •- CNC-machined brass main gear for smooth, durable power transfer
- •- 8+1 stainless-steel bearing system for reliable, corrosion-resistant operation
- •- Hydrophobic line roller bearing reduces water ingress during casting and retrieval
- •- Sealed Slammer drag system with HT-100 carbon-fibre washers on the 2500 and Dura-Drag technology on 3500–10500
- •- Left/right interchangeable handle for comfortable use by any angler
- •- Spare EVA handle knob included on 3500–10500 models
- •- Automatic bail trip on 2500–5500, manual bail trip on 6500–10500 for application-specific control
- •- Standard and high-speed gearing options available across the range
Technical Specifications
Core
| Brand | PENN |
| Type | Heavy-duty fixed-spool spinning reel |
| Ball Bearings | 8+1 stainless steel |
| Range | Slammer IV |
| Sizes | 2500, 3500, 4500, 5500, 6500, 7500, 8500, 10500 |
| Gear Ratio (10500) | 4.2:1 |
| Maximum Drag (10500) | 27.2kg |
Construction
| Body | Full metal |
| Sideplate | Full metal |
| Main Gear Material | Brass (CNC-machined) |
| Gear Technology | PENN CNC Gear |
| Handle Orientation | Left/right interchangeable |
| Spare Handle Knob | EVA, included on 3500–10500 |
Features
| Line Roller | Hydrophobic bearing |
| Sealing | IPX6-rated body and spool |
| Saltwater Use | Yes |
Performance
| Drag Design | Bearing-supported |
Line Capacity
| Mono Capacity (10500) | 395m/0.56mm • 330m/0.61mm • 230m/0.71mm |
You May Also Like
Customers Also Bought
PENN Slammer IV Heavy-Duty Saltwater Fixed Spool
—





























